Commercial Electrician in Los Angeles

What does a commercial electrician handle in Los Angeles?

We handle the full range of commercial electrical work: tenant improvements, panel and service upgrades, LED lighting retrofits, dedicated circuits, code corrections, EV charging stations, and machines hookups. We also take on industrial jobs like three-phase power and machine wiring. As a commercial electrician Los Angeles building owners and facility managers call directly, we quote the price before we start and put it in writing.

• Tenant improvement electrical: demo, new circuits, lighting, and rough-in for office, restaurant, and retail buildouts
• Panel and service upgrades when your building needs more capacity
• LED lighting retrofits for offices, warehouses, and parking areas
• Dedicated circuits for HVAC, kitchen machines, server racks, and signage
• Code corrections after a city, insurance, or sale inspection
• EV charging stations for employee and customer parking
• Industrial work: machine hookups, three-phase circuits, circuit tracing, and grounding testing with written records

In short, if it involves commercial lighting and wiring, we install it, repair it, or certify it. Also, because plenty of LA portfolios mix storefronts with apartments, you can browse our full range of electrical services for the residential side of your buildings. Same crew, same standards, one invoice.

Are you a licensed commercial electrical contractor in Los Angeles?

Yes. California requires a C-10 electrical contractor license for commercial electrical work, and we hold one. We also carry liability insurance and a contractor bond. And we can send certificates to your property management office before work starts. You can verify any California contractor license at the CSLB website in about 2 minutes.

Do not take any contractor's word for it, ours included. Instead, run the license through the Contractors State License Board and confirm the C-10 classification is active. While you are there, check the bond and workers' compensation lines. That is because a lapse in either one shifts risk onto you as the property owner.

Every commercial electrician Los Angeles businesses hire should pass that 5-minute check without excuses. We send license, bond, and insurance details with the first quote, before you ask. Your lender, insurer, or corporate office will want them on file anyway.

Do you handle tenant improvement electrical work in Los Angeles?

Yes, tenant improvement electrical is a core service for us. We take office, restaurant, and retail buildouts from plan check through final inspection, in the City of Los Angeles through LADBS and in Burbank and Glendale through their own building departments. Typical TI electrical scopes run from a few dedicated circuits to a complete rewire of the suite. So we quote each one from your plans, free.

1. Walkthrough and written quoteabout 1 to 2 hours on site

   We meet you or your architect at the space, review the plans, and price the electrical scope line by line. You approve the number before we start.

2. Permits and plan checktypically 1 to 4 weeks

   We file with LADBS for City of Los Angeles addresses. Burbank and Glendale run their own building departments. So we submit there when your property sits in those cities.

3. Rough-in2 to 10 working days, by size

   We run conduit and wire for circuits, lighting, and machines while the walls are open, then call for rough inspection.

4. Trim and finish1 to 3 days

   Once drywall is up, we set fixtures, devices, and cover plates, then label every breaker in the panel.

5. Final inspection and handoffabout half a day

   The city inspector signs off. And you receive panel schedules and as-built notes for your building records.

Tenant improvement work is where a commercial electrician Los Angeles general contractors trust earns the next call: showing up the day walls are ready and passing rough inspection the first time. Also, lighting drives most TI electrical budgets. So read our notes on planning LED lighting for a buildout before the plans are locked.

Can you work after business hours to avoid downtime?

Yes. We schedule commercial work at night, on weekends, and in early mornings so your business keeps running. Restaurants get wiring done between close and prep, usually midnight to 8 a.m. Retail stores get overnight lighting retrofits with every fixture live again before doors open. We price after-hours work in writing before we start, so the invoice matches the quote.

For multi-tenant buildings, we sequence the work so no tenant loses power during business hours. For example, a panel swap in an occupied Burbank office building runs over a weekend: shutdown Friday at 6 p.m., new machines live Saturday, testing Sunday, tenants back to normal Monday morning.

How much does a commercial electrician cost in Los Angeles?

A commercial electrician Los Angeles businesses hire typically charges $75-$140 per hour, with a $150-$350 service call for diagnosis. We quote bigger scopes flat: dedicated circuits run $300-$900, LED retrofits $80-$250 per fixture, and panel or service upgrades $3,000-$10,000+. We give you the exact number in writing before we start.

Commercial electrical pricing, typical range for the Los Angeles market

These are typical Los Angeles ranges for orientation, not a quote. Every job is priced by its own conditions, so your exact number comes from a free on-site look. Get a free estimate in minutes, or call (818) 421-5290.

Three things move commercial pricing most: ceiling access (open grid beats hard lid), wire distance from the panel, and permit scope. Also, if your panel has no open breaker spaces, budget for added panel capacity before new circuits go in. We flag that in the first walkthrough, not on the invoice.

Is a commercial LED retrofit worth it in Los Angeles?

Usually, yes. LED fixtures typically cut lighting energy use by 40-60% compared with older fluorescent tubes. And lighting is often the biggest single electric load in offices and retail. At $80-$250 per fixture installed, most retrofits pay for themselves through lower bills and near-zero relamping. We can run the payback math on your actual fixture count, free.

On top of that, LADWP runs commercial rebate programs that can offset part of the fixture cost on qualifying LED upgrades. Rebate menus change, so we check the current program before we quote. That way the rebate sits in your math, not in a maybe.

We do most retrofits overnight or across a weekend, aisle by aisle. So no part of your floor goes dark during business hours. That matters, because a commercial electrician Los Angeles stores rely on cannot leave a sales floor half-lit at opening. Warehouse high-bay swaps in Northridge and Woodland Hills business parks usually run 2 to 4 nights.

What industrial electrical work do you handle in Los Angeles?

We wire and maintain light industrial facilities: machine hookups, three-phase power distribution, control circuits, circuit tracing, and grounding testing. A three-phase machines circuit typically runs $500-$2,500 installed. As an industrial electrician Los Angeles shops can schedule around production, we do changeovers at night so your line does not stop.

Three-phase power delivers current on 3 lines instead of 1. So motors run cooler and pull more power through smaller wire. Many older industrial buildings in Van Nuys and North Hollywood already have three-phase service. But decades of tenants leave the panels mislabeled. So we trace and relabel every circuit. And your team stops guessing at the breaker wall.

We also test grounding and bonding, then document the results in writing. That is because some insurers and machines makers require proof. A weak ground can sit silent for years, then take out sensitive machine controls in a single fault. An hour of testing costs less than a stopped production line.

Do you offer electrical maintenance plans for property managers?

Yes. We run scheduled electrical maintenance for businesses and managed buildings: panel inspections, breaker exercise, thermal checks on connections, exit and emergency light testing, and parking lot lighting audits. Most managers put us on a quarterly or twice-yearly schedule per building. You get one report per visit with photos, a fix list sorted by urgency. And quoted prices, so nothing hits your budget unannounced.

Small electrical faults announce themselves early when someone looks. A warm breaker, a flickering ballast, or a corroded lug shows up on a routine scan months before it becomes an outage. That is the quiet value of a commercial electrician Los Angeles property managers keep on a schedule instead of on speed dial.

Valley housing stock applies to storefronts too. Plenty of strip retail in Sherman Oaks, Studio City, and Encino dates to the 1950s and 1960s. And some of it still runs on Zinsco and Federal Pacific era panels that earn extra attention on every visit. Meanwhile, newer centers in Glendale and Burbank mostly need lighting audits and exit sign testing to stay compliant.

Can one contractor handle electrical and plumbing for my buildings?

Yes, and that is the whole point of our company. A+ Electric & Plumbing, a licensed electrician and plumber serving Los Angeles and the San Fernando Valley, handles commercial electrical and plumbing work with one office, one dispatcher, and one invoice. For you, that means one vendor file, one insurance certificate to track, and no finger-pointing when a job touches both trades.

A typical job: a restaurant buildout needs a three-phase circuit for the walk-in cooler and a floor drain moved 4 feet. With two contractors, that is two schedules, two invoices, and an argument about who patches the slab. With us, it is one coordinated visit and one written number.

Our commercial plumbing crew covers the wet side of the same buildings: water heaters, drain lines, backflow, and fixture swaps, on the same maintenance calendar. So put both trades on one call. Call (818) 421-5290 or Get a Free Estimate for your building list.

Frequently asked questions