Faucet Installation in Los Angeles

What does faucet installation in Los Angeles include?

Faucet installation Los Angeles homeowners can trust starts with the whole connection, not just the spout. We set the new faucet, hook up the hot and cold supply lines, and test the shutoff valves under the sink. A basic faucet install runs $180-$450 in the typical range for the Los Angeles market. You get that price in writing before we start.

We install every kind of faucet. That means kitchen faucets, bathroom faucets, and utility sink faucets in the garage or laundry room. If the old faucet is stuck on with rusted nuts, we free it without scratching your sink.

Here is what most people forget. A faucet is only as good as the valves and lines feeding it. Old angle stops crack when you turn them after years of sitting still. We check them first, so you are not back under the sink in a month.

We also test the new faucet before we leave. We run hot and cold, check the sprayer, and look for drips at every joint. Then we wipe down the cabinet and walk you through it.

One more thing sets us apart. We are licensed for plumbing and electrical, so a faucet job near a garbage disposal, a dishwasher line, or an under-sink light is one team, not two. That means one call and one invoice.

How much does faucet installation in Los Angeles cost?

Faucet installation Los Angeles costs depend on the faucet and the shape of your plumbing. A standard faucet install runs $180-$450. A new sink with the faucet runs $200-$600. A simple drip repair runs $120-$300. Every number here is the typical range for the Los Angeles market, and we quote your exact price first.

Faucet and fixture prices, typical range for the Los Angeles market

These are typical Los Angeles ranges for orientation, not a quote. Every job is priced by its own conditions, so your exact number comes from a free on-site look. Get a free estimate in minutes, or call (818) 421-5290.

What moves the price? A wall-mounted or pull-down faucet takes more time to set. Corroded valves or a tight cabinet add labor. A widespread bathroom faucet with three holes costs more than a single-hole model. A new sink adds cutting and sealing time.

We publish these ranges on purpose. A lot of shops hide the price until they are standing in your kitchen. We would rather you know the numbers before you call. Every faucet installation Los Angeles price here is a range, not a quote, and we confirm your exact number on site.

Why does my kitchen tap drip, and can you fix it?

Yes, we fix dripping faucets, and most take under an hour. A drip almost always comes from a worn part inside the valve, not the whole faucet. The usual culprits are a scaled-up cartridge, a cracked O-ring, or a worn valve seat. A cartridge or drip repair runs $120-$300 in the typical Los Angeles range.

Picture a Sherman Oaks bathroom at 2 AM. The steady drip keeps you awake and wastes gallons a day. You tighten the handle, but that rarely helps for long. The part inside is worn, and no amount of muscle fixes it.

Here is a quick check you can do. Turn off the water under the sink. Then pop off the handle and look at the cartridge. If it is crusty and white, hard water scale is the problem.

• Cartridge: the most common failure, worn or scaled shut
• O-ring: a small rubber seal that dries out and cracks
• Valve seat: the surface the washer presses on, pitted by minerals
• Supply line: a slow drip under the sink, not at the spout

We carry common cartridges for the major brands. That means one visit for most drips. If the faucet body itself is cracked, a new faucet install at $180-$450 is the honest fix. We tell you which one you need, and we never push the bigger job.

How does hard water wear out a cartridge?

LA hard water is the top reason faucet cartridges wear out early. Our tap water carries a lot of dissolved calcium and magnesium. Those minerals leave a chalky scale inside the cartridge and on the valve seat. Over a few years the scale stiffens the handle and starts the drip.

You can see the same scale on your shower head and glass. Inside the faucet it does quiet damage. It grinds against the moving parts every time you turn the handle. That is why many LA faucets fail faster than the box promises.

A few habits slow it down. Wipe the aerator clean every few months. Soak a clogged aerator in white vinegar overnight to melt the scale. A whole-house water softener helps the most, and it protects your water heater and pipes too.

Want a lower water bill along the way? A WaterSense labeled faucet from the EPA WaterSense program uses less water without losing pressure. We install them all the time, and we can point you to good models when we quote.

Should I repair or replace my old faucet?

Repair a faucet when the body is solid and only a part has failed. Replace it when the finish is flaking, the base is cracked, or the parts are no longer made. A $120-$300 repair makes sense on a good faucet. A tired one is worth the $180-$450 install for a fresh start.

Age is the first clue. A faucet under 10 years old with one worn part is worth fixing. Past 15 years, parts get hard to find, and a second repair often follows the first within months.

• Repair: one worn part, solid body, faucet under 10 years old
• Replace: cracked base, flaking finish, or discontinued parts
• Replace: you are updating the sink, counter, or whole bathroom

Style matters too. If you are redoing the sink or counter, install the new faucet then. Doing both at once saves a second service call and a second cleanup.

We give you the straight call on site. If a $150 repair will hold, we say so. We do not sell you a faucet you do not need. That is our honest approach to faucet installation Los Angeles.

Can you install pull-down, touchless, and bidet faucets?

Yes, we install every modern faucet style. That covers pull-down and pull-out kitchen faucets, touchless models with a sensor, single-hole and widespread bathroom faucets, and bidet add-ons for the toilet. We also handle hose bibs outside and shower or tub valves behind the wall.

Touchless faucets need a power source, usually batteries or a small transformer under the sink. Because we are electricians too, we can add a clean under-sink outlet if yours needs one. That is one team for the faucet and its power, not two contractors trading blame.

Some jobs reach past the faucet. An outdoor hose bib replacement runs $150-$300. A shower or tub valve runs $250-$700, since we open the wall to reach it. Angle stops come as a pair at $100-$200. We give you the price for each before we start.

Installing a new sink often touches the drain and the disposal. If your garbage disposal is leaking or dead, we swap it in the same visit. A slow sink is usually a clog, and our drain cleaning crew clears it fast.

What is your faucet installation Los Angeles process?

Our faucet installation Los Angeles process is quick and clean. Most jobs finish in one visit, often under two hours. Here is exactly how we do it, from the first shutoff to the final leak test.

1. Shut off and inspectabout 15 minutes

   We close the angle stops, drain the line, and check the valves and cabinet for damage.

2. Remove the old faucetabout 20 minutes

   We disconnect the supply lines and lift out the old faucet and any worn hardware.

3. Set the new faucetabout 30 minutes

   We seat the new faucet, seal the base, and connect the hot and cold supply lines.

4. Replace worn valvesabout 20 minutes

   If an angle stop is old or weeping, we swap it now so it does not fail later.

5. Test and clean upabout 15 minutes

   We turn the water on, run every setting, check for leaks, and wipe down the area.

We come stocked for the common jobs. Our trucks carry cartridges, angle stops, supply lines, and the popular faucet brands. So most visits are one trip, not two. If your faucet is a rare model, we order the part and set a fast return.

We protect your cabinet and floor the whole time. Then we walk you through the new faucet before we go. Every faucet installation Los Angeles job is done to California code and backed by our workmanship guarantee.

Who does faucet installation in Los Angeles near me?

A+ Electric & Plumbing, a licensed electrician and plumber serving Los Angeles and the San Fernando Valley, handles the faucet installation Los Angeles homeowners rely on. We work across the Valley, from Van Nuys to Woodland Hills. Because we hold both trade classifications, one team sets the faucet and handles any wiring nearby. One call, one schedule, one invoice.

We cover the whole area near you. Sherman Oaks, Encino, Studio City, Van Nuys, North Hollywood, Burbank, and Glendale are all on our regular routes. A live person answers any hour, so you are never stuck with a machine. Then a licensed tech comes out, not a subcontractor.

Check us before we start. Our CSLB license is #942404, and you can verify it at the CSLB. Licensed work means we install to code and guarantee it. If something is not right, we come back and make it right.

Need more than a faucet? Our residential plumbing team handles sinks, toilets, and water heaters too. See our full list of plumbing services in Los Angeles while you are here.

Ready for a new faucet or a fix for that drip? Call (818) 421-5290 or Get a Free Estimate. We will schedule your visit fast and give you the price before we start.

Frequently asked questions